## Definition

## Invariance

## Reciprocity

## Étendue and reciprocity

## Collimated beam

## Rays

## Alternative approaches

**Specific** (**radiative**) **intensity** is a quantity used in physics that describes electromagnetic radiation. It is a term used in much of the older scientific literature. The present-day SI term is spectral radiance, which can be expressed in base SI units as W m sr Hz.

It gives a full radiometric description of the field of classical electromagnetic radiation of any kind, including thermal radiation and light. It is conceptually distinct from the descriptions in explicit terms of Maxwellian electromagnetic fields or of photon distribution. It refers to material physics as distinct from psychophysics.

For the concept of specific intensity, the line of propagation of radiation lies in a semi-transparent medium which varies continuously in its optical properties. The concept refers to an area, projected from the element of source area into a plane at right angles to the line of propagation, and to an element of solid angle subtended by the detector at the element of source area.

The term *brightness* is also sometimes been used for this concept. The SI system states that the word brightness should not be so used, but should instead refer only to psychophysics.

The geometry for the definition of specific (radiative) intensity. Note the potential in the geometry for laws of reciprocity.

The specific (radiative) intensity is a quantity that describes the rate of radiative transfer of energy at *P*_{1}, a point of space with coordinates **x**, at time *t*. It is a scalar-valued function of four variables, customarily written as

*I*(**x**,*t*;**r**_{1},*ν*)

where:

*ν*denotes frequency.**r**_{1}denotes a unit vector, with the direction and sense of the geometrical vector**r**in the line of propagation from- the effective source point
*P*_{1}, to - a detection point
*P*_{2}.

*I* (**x**, *t* ; **r**_{1}, *ν*) is defined to be such that a virtual source area, d*A*_{1} , containing the point *P*_{1} , is an apparent emitter of a small but finite amount of energy d*E* transported by radiation of frequencies (*ν*, *ν* + d*ν*) in a small time duration d*t* , where

- d
*E*=*I*(**x**,*t*;**r**_{1},*ν*) cos*θ*_{1}d*A*_{1}d*Ω*_{1}d*ν*d*t*,

and where *θ*_{1} is the angle between the line of propagation **r** and the normal *P*_{1}*N*_{1} to d*A*_{1} ; the effective destination of d*E* is a finite small area d*A*_{2} , containing the point *P*_{2} , that defines a finite small solid angle d*Ω*_{1} about *P*_{1} in the direction of **r** . The cosine accounts for the projection of the source area d*A*_{1} into a plane at right angles to the line of propagation indicated by **r** .

The use of the differential notation for areas d*A*_{i} indicates they are very small compared to *r*, the square of the magnitude of vector **r**, and thus the solid angles d*Ω*_{i} are also small.

There is no radiation that is attributed to *P*_{1} itself as its source, because *P*_{1} is a geometrical point with no magnitude. A finite area is needed to emit a finite amount of light.

For propagation of light in a vacuum, the definition of specific (radiative) intensity implicitly allows for the inverse square law of radiative propagation. The concept of specific (radiative) intensity of a source at the point *P*_{1} presumes that the destination detector at the point *P*_{2} has optical devices (telescopic lenses and so forth) that can resolve the details of the source area d*A*_{1}. Then the specific radiative intensity of the source is independent of the distance from source to detector; it is a property of the source alone. This is because it is defined per unit solid angle, the definition of which refers to the area d*A*_{2} of the detecting surface.

This may be understood by looking at the diagram. The factor cos *θ*_{1} has the effect of converting the effective emitting area d*A*_{1} into a virtual projected area cos *θ*_{1} d*A*_{1} = *r* d*Ω*_{2} at right angles to the vector **r** from source to detector. The solid angle d*Ω*_{1} also has the effect of converting the detecting area d*A*_{2} into a virtual projected area cos *θ*_{2} d*A*_{2} = *r* d*Ω*_{1} at right angles to the vector **r** , so that d*Ω*_{1} = cos *θ*_{2} d*A*_{2} / *r* . Substituting this for d*Ω*_{1} in the above expression for the collected energy d*E*, one finds d*E* = *I* (**x**, *t* ; **r**_{1}, *ν*) cos *θ*_{1} d*A*_{1} cos *θ*_{2} d*A*_{2} d*ν* d*t* / *r* : when the emitting and detecting areas and angles d*A*_{1} and d*A*_{2}, *θ*_{1} and *θ*_{2}, are held constant, the collected energy d*E* is inversely proportional to the square of the distance *r* between them, with invariant *I* (**x**, *t* ; **r**_{1}, *ν*) .

This may be expressed also by the statement that *I* (**x**, *t* ; **r**_{1}, `ν`) is invariant with respect to the length *r* of **r** ; that is to say, provided the optical devices have adequate resolution, and that the transmitting medium is perfectly transparent, as for example a vacuum, then the specific intensity of the source is unaffected by the length *r* of the ray **r** .

For the propagation of light in a transparent medium with a non-unit non-uniform refractive index, the invariant quantity along a ray is the specific intensity divided by the square of the absolute refractive index.

For the propagation of light in a semi-transparent medium, specific intensity is not invariant along a ray, because of absorption and emission. Nevertheless, the Stokes-Helmholtz reversion-reciprocity principle applies, because absorption and emission are the same for both senses of a given direction at a point in a stationary medium.

The term étendue is used to focus attention specifically on the geometrical aspects. The reciprocal character of étendue is indicated in the article about it. Étendue is defined as a second differential. In the notation of the present article, the second differential of the étendue, d*G* , of the pencil of light which "connects" the two surface elements d*A*_{1} and d*A*_{2} is defined as

- d
*G*= d*A*_{1}cos*θ*_{1}d`Ω`_{1}= $scriptlevel="0">\frac{\text{d}{A}_{1}\text{}\phantom{\rule{thinmathspace}{0ex}}\text{d}{A}_{2}\text{}\mathrm{cos}{\theta}_{1}\text{}\mathrm{cos}{\theta}_{2}}{{r}^{2}}\{\backslash displaystyle\; \{\backslash frac\; \{\{\backslash mbox\{d\}\}A\_\{1\}\backslash \; \backslash ,\{\backslash mbox\{d\}\}A\_\{2\}\backslash \; \backslash cos\; \{\backslash theta\; \_\{1\}\}\backslash \; \backslash cos\; \{\backslash theta\; \_\{2\}\}\}\{r^\{2\}\}\}\}$ = d*A*_{2}cos*θ*_{2}d`Ω`_{2}.

This can help understand the geometrical aspects of the Stokes-Helmholtz reversion-reciprocity principle.

For the present purposes, the light from a star can be treated as a practically collimated beam, but apart from this, a collimated beam is rarely if ever found in nature, though artificially produced beams can be very nearly collimated. For some purposes the rays of the sun can be considered as practically collimated, because the sun subtends an angle of only 32′ of arc. The specific (radiative) intensity is suitable for the description of an uncollimated radiative field. The integrals of specific (radiative) intensity with respect to solid angle, used for the definition of spectral flux density, are singular for exactly collimated beams, or may be viewed as Dirac delta functions. Therefore the specific (radiative) intensity is unsuitable for the description of a collimated beam, while spectral flux density is suitable for that purpose.

Specific (radiative) intensity is built on the idea of a *pencil* of rays of light.

In an optically isotropic medium, the rays are normals to the wavefronts, but in an optically anisotropic crystalline medium, they are in general at angles to those normals. That is to say, in an optically anisotropic crystal, the energy does not in general propagate at right angles to the wavefronts.

The specific (radiative) intensity is a radiometric concept. Related to it is the intensity in terms of the photon distribution function, which uses the metaphor of a *particle* of light that traces the path of a ray.

The idea common to the photon and the radiometric concepts is that the energy travels along rays.

Another way to describe the radiative field is in terms of the Maxwell electromagnetic field, which includes the concept of the wavefront. The rays of the radiometric and photon concepts are along the time-averaged Poynting vector of the Maxwell field. In an anisotropic medium, the rays are not in general perpendicular to the wavefront.

Copyright 2008-2017 www.21pw.com